multipath at boot

• For Red Hat Enterprise Linux 4 or later, issue one of the following commands:
  • chkconfig multipathd on
  • chkconfig --level 345 multipathd on
    Note: This command enables multipathd service startup at boot.
• For SUSE Linux Enterprise Server 9 or later, issue one of the following commands:
  • chkconfig boot.multipath on
  • chkconfig --level 345 boot.multipath on
    Note: This command enables boot.multipath service startup at boot.
  After running one of these commands, issue one of these commands:
  • chkconfig multipathd on
  • chkconfig --level 345 multipathd on
    Note: This command enables multipathd service startup at boot.